Table of Contents (click to expand)
- What Happens When You Spin A Weight In A Circle?
- Why Does A Washing Machine Shake Violently During The Spin Cycle?
- How Much Force Does One Wet Towel Make At 1,400 RPM?
- Why Is The Shaking Worst Partway Through Spin-Up?
- What Stops A Washing Machine From Shaking Itself Apart?
- So, Why Does One Wet Towel Shake The Machine But A Full Load Doesn't?
A washing machine shakes when its load is bunched on one side of the drum, because an off-center lump pulls outward as it spins, and that pull grows with the square of the spin speed: a 0.7 kg wet lump at the drum wall pulls with about 6 newtons during a 60 rpm wash tumble but about 3,300 newtons (the weight of four adults) at 1,400 rpm. A full load spreads its weight all the way around the drum, so the pulls on opposite sides cancel and the drum runs true. The worst banging happens partway through spin-up, when the drum speed passes through the natural bounce rate of the spring-mounted tub, which is why machines carry concrete counterweights, shock absorbers, balance rings and imbalance sensors to get through that moment.
Six bath towels go in on Sunday morning. The machine fills, tumbles, spins at full speed and hums like a fridge.
One bath mat goes in on Sunday afternoon, on the same program. At the start of the spin it begins to thump, then bang, then take a few steps toward the door, as if it had somewhere better to be.
Every instinct says this should be the other way around. More laundry is more weight, and more weight should mean more shaking. The answer lies in the physics of anything that spins, and it has little to do with how much you washed. It is about where the weight sits.
What Happens When You Spin A Weight In A Circle?
Tie a shoe to a string and swing it around your head. The string pulls outward on your hand the whole time. Let go, and the shoe does not fly outward. It flies off in a straight line, in whatever direction it was heading at that instant.
That pull is the whole story of a washing machine. A moving object wants to keep going straight. To take it around a circle, something has to keep pulling it toward the center, and for the shoe that is the string. Physicists call this inward pull a centripetal force. The string pulls the shoe in, and the shoe pulls back on the string just as hard. That pull back is what your hand feels. The outward pull has a popular name, centrifugal force, and physicists are blunt about it: centrifugal force is a fiction. Nothing pushes the shoe outward. It tries to go straight, and the string stops it.
Now swap the string for a drum. The towel is the shoe and the drum wall is the string. Every scrap of wet cloth is trying to fly off straight, and the wall pulls it around the circle instead. In return the cloth pulls back on the wall, and on the axle that holds it.

Why Does A Washing Machine Shake Violently During The Spin Cycle?
With a full drum, those pulls come from every direction at once. A sock on the left pulls the axle left while a shirt on the right pulls it right. Add them up around the circle and they cancel. The axle feels plenty of pulling but almost no net pull in any one direction, so the drum spins true.
Now put one soaked bath mat in on its own. It cannot spread itself around the drum. It sits in one lump, on one side, and its outward pull has nothing opposite to cancel it. The axle gets pulled toward the lump instead. A quarter-turn later the lump is somewhere else, and the axle gets pulled that way instead. The whole tub is swung in a circle once per revolution, and the cabinet shakes with it.
Washing machine makers know this. One patent on front-loader control notes that the lopsided pull shows up precisely when the loads are small, because a small load slides to the bottom of the drum and collects in one place. The amount of laundry was never the problem. The lump is.

How Much Force Does One Wet Towel Make At 1,400 RPM?
The pull from an off-center lump follows a tidy rule. It is the mass of the lump, times its distance from the axle, times the square of the spin speed. The squared part is what matters: double the speed and the pull quadruples. It is the same rule that holds the shoe on its string.
Take a front-loader at 1,400 rpm, a typical top speed for everyday cottons. For the lump, take a soaked bath towel with 0.7 kg of its mass pressed against the drum wall. These are round numbers, not a spec for any one machine. During the wash tumble at 60 rpm, that towel pulls on the wall with about 6 newtons, the weight of a small apple. At 1,400 rpm, the same towel at the same spot pulls with about 3,300 newtons, the weight of four adults. And that pull sweeps around the axle more than twenty times a second.
Water is why a towel counts. Every liter a towel holds adds a kilogram to the lump. Out of the rinse a towel carries its own weight in water, and all of that goes into the rule. Wet cloth also stops moving once the spin begins. During the wash the drum turns at a crawl and the laundry tumbles over itself. Speed it up and the outward pull on the cloth soon matches its weight, so it stays pinned to the wall through the top of the turn. In a household drum that happens at around 60 to 80 rpm. Above it, the laundry is a fixed part of the spinning drum. Wherever the towel stuck is where it stays, all the way up to 1,400 rpm. A full load sticks too, but all around the circle, so the pulls cancel.

Why Is The Shaking Worst Partway Through Spin-Up?
If the pull grows with speed squared, the shaking should be worst at top speed. Yet the loudest banging often comes partway through spin-up, then eases as the drum reaches full speed. That is resonance, the same effect that lets marching soldiers bounce a bridge.
The tub, the tank the drum spins inside, hangs on springs and shock absorbers, so it has a natural rate at which it bounces if you nudge it. Physicists call that its resonant frequency; call it the tub's bounce rate. Push a child on a swing in time with that rate and each push adds to the last. The off-center towel is exactly that: a push on the tub, delivered once per revolution. As the drum speeds up, the pushes come faster. At some point they arrive at the tub's own bounce rate, and the tub swings further with every turn. Then the drum keeps accelerating, the pushes outrun the bounce, and the swing settles to a steady wobble.
So a well-designed front-loader does not spin at its bounce rate. It passes through it and keeps going. Engineers who model these machines tell designers to pass by those speeds quickly and never park a spin speed near one. Full speed sits above the danger zone.

What Stops A Washing Machine From Shaking Itself Apart?
Open up a front-loader and the first surprise is a lump of concrete. Makers bolt concrete counterweights to the tub as ballast against the stresses of a high-speed spin. The towel's pull now has to move a tub that weighs far more, so it moves it less. The concrete makes the lump a smaller fraction of the thing it is trying to swing.
The second surprise is that the tub is not bolted to the cabinet. It hangs on springs and leans on shock absorbers. The springs let the tub swing a little without handing the motion to the cabinet, and the dampers soak up the energy of the swing.

Concrete and springs only soften the problem. The clever fix cancels it. Around the rim of many drums runs a sealed hollow ring with something inside that is free to move: a few liters of liquid, or a track of loose steel balls. Spin a ring of free balls fast enough and they do not stay where gravity put them. They roll to the spot where they are flung outward hardest, and that spot is opposite the heavy lump. The towel pulls one way, the balls pull the other, and the axle feels the difference instead of the sum. The liquid version works the same way, and one patent for a fluid balance ring even names the villain: “These towels create an unbalance.”
There is a catch, and it is timing. The balls only settle into place above the tub's bounce rate. Below it they are not yet where they need to be. The ring fixes the cruise but not the climb.

So modern machines try to catch the problem before the spin. An imbalance sensor watches the drum, and the machine tumbles, measures and tumbles again. If it cannot get the load even enough, it caps the spin speed or stops. LG's front-loaders flash a UE code for this, which means the laundry is piled up on one side of the drum. That is not the machine failing. It is the machine declining to do the thing you just read about.
So, Why Does One Wet Towel Shake The Machine But A Full Load Doesn't?
Because the drum does not care how much mass it spins. It cares about where that mass sits. Everything in the drum is the shoe on the string: pulled around a circle, and pulling back on the axle in return. A full load pulls back from every direction, and the pulls cancel. A lone wet towel pulls back from one direction, and nothing cancels it. That leftover pull grows with the square of the spin speed, from the weight of an apple during the wash to the weight of four adults at full spin, sweeping around the axle more than twenty times a second.
The violence you hear is that pull meeting a tub on springs. On the way up to full speed, the drum passes through the tub's bounce rate, and for a few seconds every turn adds to the last. Past that speed the shaking settles, which is why the banging often fades before the spin ends. Concrete, springs, dampers, balance rings and sensors each fight one stage of that story, and none of them is perfect, which is why machines still walk.
The rest is up to you. Never spin one heavy item alone: add a couple of towels so there is weight on the other side to cancel it, and tuck heavier articles around lighter ones. Level the feet: grip the machine from the top, rock it, and twist the feet until the rocking stops, because a foot a few millimeters off the floor can undo a block of concrete. On a new front-loader, remove the shipping bolts that lock the tub for transport, or it cannot swing on its springs at all. The fix that costs nothing is the one the physics points at first: put a second towel in, on the other side.
References (click to expand)
- 6.3 Centripetal Force — University Physics Volume 1, OpenStax
- Resonance and Beating, Base Excitation, Rotating Unbalance (MCE371 Mechanical Vibrations lecture notes) — Cleveland State University
- Method for operating a front-loading washing machine (US6637062B2, Whirlpool) — Google Patents
- 14.1 Fluids, Density, and Pressure — University Physics Volume 1, OpenStax
- Nygårds, T. & Berbyuk, V. Multibody modeling and vibration dynamics analysis of washing machines. Multibody System Dynamics 27, 197–238 (2012); author manuscript — Chalmers Publication Library
- Resonance — HyperPhysics, Georgia State University
- Counterweight for washing machine tub (US7762107B2, Electrolux) — Google Patents
- Podesva, J. et al. Laundry Machine Auto-Balancing Mechanism: Non-Linear Simulation of Imbalance Settlement. Symmetry 16(8), 980 (2024)
- Fluid balancing ring and method for using same (US6327732B1, Maytag) — Google Patents
- Front Load Washer: How to resolve a UE error — LG Support
- Washer is Vibrating, Walking or Moving — Whirlpool Product Help







