Table of Contents (click to expand)
Yes, but barely. A flame holds a thin population of ions, so current can cross it, though a wood fire conducts about seven billion times worse than copper. Those ions are not made by the heat, which is far too feeble to account for them, but by a chemical step inside the burning itself, the same step that runs a standard lab instrument, the flame ionization detector.
A tree comes down on a power line. It catches fire, and the flames start to pulse. Not flicker, the way flames always do. Pulse, in time with something, brightening and dimming on a beat.
This one was filmed at Apolda, in Germany, after a storm.
Videos like this turn up every storm season, and the comments always split two ways. One camp says the fire is conducting the electricity. The other says fire is hot air, and air is one of the best insulators we have. Both camps have a point.
Fire does conduct electricity. It is also not the heat that lets it.
What Has To Be True For Anything To Conduct Electricity?
Start with a road.
An electric current is charge on the move, so a material needs particles that carry charge and are free to travel. Think of them as cars on a road. No cars, no traffic, however wide the road.
Copper is a highway at rush hour. Its atoms pool their outer electrons, staggering numbers of them, and they drift when you push them.
Salt water works differently. Dissolve table salt and it splits into charged sodium and chlorine particles. A charged atom or molecule is called an ion, and ions are the cars here. There are fewer of them, and they lumber rather than dart. That is why salt water conducts far worse than metal, yet well enough to ruin a phone.
Now cool air. Air is a road at 4 a.m. with nothing on it. Its molecules keep a firm grip on their electrons, so almost nothing is free to move. Conductivity measures how well a material passes current, in siemens per meter, and physicists put air below a quadrillionth of one. That is why power lines can hang bare in the open.
The rest of this article asks one question: how many cars does a flame have?

Is Fire A Form Of Electricity, Or Is It A Plasma?
No, and electricity is not a form of fire either.
Fire is a chemical reaction. Fuel and oxygen rearrange into new molecules and release heat, and the glow is the hot gas made along the way. We have a whole article on which state of matter fire belongs to, and it sits between the usual boxes.
The closest box is plasma: a gas in which some of the particles have been ionized, meaning an electron has been knocked loose from them. It holds free ions and free electrons mixed with ordinary neutral gas, and overall it stays neutral because the positives and negatives balance. What sets it apart is the one thing the road cares about: a plasma has cars.
Combustion scientists call a flame a weakly ionized plasma. The word doing the work is weakly: only a tiny fraction of the gas carries charge.
Small is not zero, though, and not zero turns out to be enough.

Where Does A Flame Get Its Charge?
Fire does release electrons, and this is where the obvious explanation, heat, collapses.
Heat a gas enough and its particles slam together hard enough to ionize each other. That is real, and it is how the Sun ends up as plasma.
So does it work for a flame? Run the numbers for a propane flame, about as hot as ordinary burning gets, and heat alone should give 17 million ions per cubic centimeter.
Measure a real flame and you find between 1 billion and 10 billion ions per cubic centimeter.
The flame carries 60 to 600 times more charge than its temperature can explain. Only one conclusion is left: the ions are made by chemistry, not by heat.
Heat gets the blame for everything fire does. Here, heat is innocent.

The chemical route is called chemi-ionization, and it takes two steps. First, a fragment called CH, a single carbon still holding one hydrogen, meets a lone oxygen atom. Both are leftovers, halfway through burning. Their reaction releases enough energy to ionize the product:
CH + O → CHO+ + e−
An ion and a free electron, made right there in the flame. No heat required.
Second, the CHO+ ion meets a water molecule. Fire makes plenty of water, since the hydrogen in the fuel burns to H2O. The ion hands over a proton:
CHO+ + H2O → H3O+ + CO
The product is hydronium, a water molecule carrying one extra proton. It is the main positive ion in an ordinary flame.
So the cars on the road are built by the burning. Combustion is not a hot process that happens to make ions. It is an ion-making process. Every candle you have lit, and every click of a pocket lighter, was running this reaction.
So How Well Does A Flame Conduct Electricity?
Badly. This is the part the viral videos leave out.
One team fired microwaves through a burning pile of vegetation and worked out the conductivity from what came through. The fire came in at a few thousandths of a siemens per meter.
Put that on the ladder. Sea water manages about 5 siemens per meter, hundreds of times better than the flame. Copper is about seven billion times better again.
Now look down the ladder. Cool air sits below a quadrillionth, so the flame beats it by trillions of times. That is the comparison that matters. The flame is not replacing a wire but a gap that was doing an excellent job of stopping current.

Lightning shows what a plasma looks like when it is not weak. Charge builds up in a storm cloud until the air can no longer hold it off, and the current heats the air to about 28,000 °C (50,000 °F), roughly five times hotter than the surface of the Sun. At that heat the molecules in the channel are torn apart and ionized, and the whole channel is plasma.
Now count the cars. A lightning channel packs ten million to a hundred million times more of them into the same space as a flame. If a candle is a country lane at night, lightning is a highway jammed bumper to bumper. The order of events is reversed, too: in lightning the electricity comes first and the heat is what it leaves behind, while in a flame the chemistry comes first and the charge is a by-product.
What Happens If Fire Touches Electricity?
Now back to the tree.
Saying "the flame conducted the current" is too simple. What a fire under a power line does is spoil the insulation. Vegetation fires under high-voltage lines lower the voltage the air gap can hold off, because they raise both the conductivity and the temperature of the air.
Engineers call the result a flashover: a gap that held off the voltage in dry air gives way once it fills with hot gas full of ions, and current jumps across as an arc. An arc is bright, unstable, and pulses. That is the beat in the video.
A wood fire has a second source of charge that a gas stove lacks. Plants concentrate potassium and sodium as nutrients, and burning releases them into the flame. Those metals ionize at the slightest push, heat included. A campfire conducts better than a clean gas flame, and the reason is the plant.
So utilities treat fire under a line as an emergency, since it can knock circuits out from a distance with no branch touching anything. The hazard runs the other way too: a tree struck by lightning can carry enormous current, and the steam inside can burst the trunk apart. If you meet a downed line, stay well away and call the utility.

What Can You Do With The Charge In A Flame?
The cheapest way to prove a flame is full of ions is to put it between two charged plates. The positive ions are pulled toward the negative plate, and as they go they drag neutral gas molecules along too. The whole flame leans, an effect called ionic wind. Turn the voltage up to a couple of thousand volts and a propane flame is blown clean off its burner. No draft, no fan, nothing touching it.
The trick was presented to the Royal Society as long ago as 1814. Nobody needed to know about electrons to notice that fire answers a charged plate.

The useful application turned out to be smaller and far more common. A standard lab instrument, the flame ionization detector, runs a small hydrogen and air flame. A clean hydrogen flame makes few ions on its own, because it has no carbon and chemi-ionization needs those CH fragments, so it sits there quiet, conducting almost nothing.
Feed any organic compound in and the flame fills with ions, because now there is carbon. An electrode just above the flame collects them, and a meter reads the tiny current.
The elegant part is what that current measures. Molecules entering the flame get torn apart, and the pieces react until every carbon has become the same fragment, so each carbon gives the same signal and the response tracks the number of carbon atoms. The detector does not identify the molecule. It counts carbon.
That is not a curiosity, either. US air-pollution rules write the detector into smokestack testing, with results reported as carbon equivalents: ethane counts for 2, propane for 3, butane for 4. Somebody is measuring a smokestack right now by burning a sample and weighing the electricity.

So, can fire conduct electricity? Yes. A flame is a weak plasma, and it carries current because it holds ions that can move. The satisfying part is where they come from: not the heat, which falls short by a factor of hundreds, but the burning itself. A scrap of half-burnt fuel meets an oxygen atom and comes out ionized, the fragment left behind passes a proton to a water molecule, and hydronium does the carrying.
Both camps were half right, then. The fire does conduct, and it is a terrible conductor. The video shows not a flame working as a wire but a gap that used to be a good insulator and has stopped being one, arcing over and over.
Look at a candle now and the arithmetic is different. Somewhere in that quiet flame, a reaction is manufacturing charge out of the fuel, a few billion ions to the cubic centimeter. It is the same reaction that lets a machine count carbon atoms in a smokestack, and it has run in every fire anyone ever sat around.
References (click to expand)
- Electric Field Effect on Flames: Ionic Wind and Joule Heating (Lecture 4, Princeton Combustion Summer School 2021) — Princeton CEFRC
- Charged species concentration in combusting mixtures using equilibrium chemistry — S. M. Aithal, Argonne National Laboratory (OSTI)
- Measurement of Electrical Conductivity for a Biomass Fire — PubMed Central (PMC2635744)
- Gas Chromatography: Detectors (Encyclopedia of Analytical Science) — Colorado State University
- Method 25A: Determination of Total Gaseous Organic Concentration Using a Flame Ionization Analyzer — US EPA
- Conductivity of Some Common Materials (Electromagnetics II, Ellingson) — Physics LibreTexts
- Dynamic behaviours of a flame as plasma in a strong electric field — Scientific Reports (PMC6825191)
- Understanding Lightning Science — US National Weather Service
- Measuring Method for Lightning Channel Temperature — Scientific Reports







