Table of Contents (click to expand)
- How Does A Microwave Heat Food In The First Place?
- Why Do Some Mugs Get So Hot In The Microwave? Culprit One: Hidden Water
- Can The Ceramic Itself Absorb Microwaves?
- Why Do Starbucks Mugs (And Grandma's China) Say Do Not Microwave?
- What Does "Microwave Safe" Actually Mean?
- So, Why Do Some Ceramic Mugs Stay Cool And Others Burn Your Fingers?
A well-made ceramic mug barely absorbs microwaves, so the coffee heats and the cup stays cool. A mug that comes out hot has one of three problems: water soaked into a porous or crazed body, a body or glaze that absorbs microwaves on its own (iron-rich glazes are the usual culprits), or real metal in the decoration, which sparks rather than warms. To check a dish, the USDA suggests microwaving it beside a cup of water for one minute: the water should be warm and the dish should not.
Picture the office kitchen at 3 pm. Two mugs go into the microwave, one after the other, for the same 90 seconds. The first comes out with coffee hot enough to fog your glasses and a handle you can hold without thinking. The second comes out with lukewarm coffee and a handle that could brand cattle.
Same oven, same time, and both mugs say "ceramic" on the bottom. One of them has been reading a different set of physics textbooks.
The official advice does not help, because it does not agree with itself. The FDA says ceramic containers "cannot be heated by microwaves." The USDA says a dish that gets hot "contains metal in the material or glaze." Ceramic engineers say the usual culprit is neither. To sort them out, we need to know what a microwave does to your coffee in the first place.

How Does A Microwave Heat Food In The First Place?
Stir a spoonful of sugar into water. It dissolves because each water molecule has a positive end and a negative end, which is why water is a polar molecule. Think of it as a tiny compass needle for electricity: put it in an electric field and it swings around to line up.
Inside the oven, a device called a magnetron fills the box with radio waves. Their electric field flips direction 2.45 billion times a second, and every water molecule in your coffee swings to face the new way each time. Swinging needles rub against their neighbors, and that rubbing is heat. A microwave can only heat something with parts free to swing.
Engineers put a number on this. They call it the loss tangent: how much of a passing wave a material turns into heat. Think of it as the material's appetite for microwaves, and that is the only piece of jargon you need today.
A fired ceramic is the opposite of water. Its atoms sit locked in a rigid glassy network, like compass needles glued to the dial, so its appetite is tiny. One set of measurements found that a kitchen microwave loses most of its power within about two centimeters (under an inch) of entering water. Run the same sum for a dense ceramic and the wave travels about eight meters, the length of a bus, before losing as much.
That is several hundred times deeper into the mug than into the coffee. Your cup is close to invisible, which is the grain of truth in the FDA's line about ceramic that "cannot be heated."

Why Do Some Mugs Get So Hot In The Microwave? Culprit One: Hidden Water
So the ceramic is close to invisible, while the coffee is not. What if the mug has coffee in its walls?
Clay does not turn into glass all at once in the kiln. It vitrifies: the grains melt together and the pores between them close up. How far that goes depends on the clay and how hot it was fired. Customs officers, who sort dishes for import duty, use water absorption as the dividing line. Porcelain, fired hottest, soaks up less than half a percent of its weight. Stoneware is allowed a few percent. Earthenware, fired cooler, can hold ten percent or more.
Ten percent water, by weight, hidden inside a "dry" mug. A glaze seals most of the surface, but water has ways in. The unglazed ring on the bottom is one. A crazed glaze, that fine spiderweb of cracks on old ware, is another. Once water is in, the glaze on top keeps it there for a long time.

Now put that water in the oven. Soaked minerals have a far bigger appetite than dry ones, and the more moisture, the bigger the appetite. In one set of measurements, the same clay turned six times as much of a passing microwave into heat once it held several times more water.
That is culprit one, and the trade view is that it is the common one. It also gives you a tell. A mug that is worse straight out of the dishwasher has water in its walls. Leave it bone dry for a week and it will behave better, though it is not fixed. It is thirsty.
Can The Ceramic Itself Absorb Microwaves?
Yes, and the proof comes from Corning.
In 1982 the company was granted a patent for a new dinnerware material, and the reason for it was a flaw in its earlier glass-ceramic dishes. In the inventor's words, they were "highly susceptible to excessive heating" in a microwave. In the company's own test, five minutes in the oven beside some water took the dishes past 200 °C (about 400 °F). A glass-ceramic has no pores and holds no water. The material itself was doing the absorbing.
The patent does not say what, in that recipe, was swinging with the field, so neither will we. Fired ceramic is not one material.
In the pottery studio, iron is the usual culprit. Potters' references warn about glazes high in iron oxide, with tenmoku, the glossy black-brown glaze on Japanese tea bowls, as the classic example, and clay bodies high in iron heat up too. The physics agrees. In a standard heating table, magnetite, an iron oxide, is filed under "Easily Heated": a sample shot past a thousand degrees Celsius in under three minutes in a microwave, while dense alumina, given even longer, stayed under 80 °C.
There is a nasty twist, because appetite grows with temperature. Alumina's climbs about twelvefold between room temperature and 700 °C, and a black iron-chromium pigment's grew more than two hundred times once hot. A patch of glaze that starts warm absorbs a little more, gets warmer, absorbs more still. Engineers call this thermal runaway, and it is why the hot mug is often hot in one place, usually the handle you reach for.

If a ceramic can absorb microwaves, someone will sell that as a feature, and Corning did. In 1976 it patented a browning dish for the microwave: a body the wave passes through, wearing on its underside a thin tin oxide skin built to absorb. The skin reaches the roughly 230 °C (450 °F) that browning needs. So the question was never whether ceramic can get hot in a microwave. The real question is whether the maker of your mug meant it to.
Why Do Starbucks Mugs (And Grandma's China) Say Do Not Microwave?
Culprit three is the one the USDA had in mind, and it behaves unlike the other two: instead of warming in silence, it sparks.
Gold rims, platinum bands, metallic logos and foil decals are real metal. Metal in a microwave reflects the wave and concentrates the field at its edges, and the result is sparks inside the oven. The USDA's list of triggers starts with gold paint on dishes, and its not-safe list includes china with metallic trim. The same sparks, from a different cause, are behind why grapes explode in a microwave.
The "do not microwave" warning on many branded mugs is about this. In 2024 the US product-safety regulator announced a recall of nearly half a million Starbucks-branded ceramic mugs with a metallic coating, because they "can overheat or break" when microwaved or filled with scalding liquid. A dozen incidents and ten injuries were behind it. A plain glazed mug with no metallic finish is a different object, so read the base.
This is also where the USDA's explanation is too broad. Metal announces itself with sparks. A mug that warms in silence, with no glitter on it anywhere, is telling you about culprit one or two.

What Does "Microwave Safe" Actually Mean?
There is no government certificate behind those two words on the bottom of your mug. In the US there is an industry test method instead, ASTM C1607, whose scope could be this article's summary. Most ceramicware "is minimally absorbing of the microwave energy and will not heat up significantly," but some products absorb more, get hot, and "pose a serious hazard." The test covers reheating only, up to five minutes at full power. Metal is ruled out at the door: dishes with a metallic glaze, decoration or paint are out unless marked microwave safe.
Is glass any better? The USDA's safe list puts heatproof glass and glass-ceramic at the top, and the physics agrees. A glass has no pores to hold water, no glaze to craze, and no clay body to vary from batch to batch.
For everything else, the USDA has a test you can run before lunch. Put a cup of tap water in a glass measure. Place it in the microwave beside, but not touching, the dish on trial, and run the oven on high for one minute. The water should be warm and the dish should not. A microwave also has hot and cold spots, so a dish that warms on one side may just be sitting in a hot spot. Turn it and run the test again before you convict it.

So, Why Do Some Ceramic Mugs Stay Cool And Others Burn Your Fingers?
The rule from the start still holds: a microwave heats whatever has parts free to swing with the field. Water does, and a well-fired, well-glazed ceramic does not. That is the cool mug, and it is the normal case.
The hot mug has smuggled something in. Most often it is water, soaked into a porous or crazed body through the bare foot ring, and the dishwasher tops it up every cycle. Sometimes it is the recipe itself, an iron-heavy glaze or body with an appetite of its own, piling heat up in one spot. And sometimes it is real metal, a gold rim or a foil logo, which does not so much warm as throw sparks.
The FDA is right about good ceramic. The USDA is right that metal is dangerous, and its one-minute test catches all three culprits even though its explanation names one. Ceramic engineers are right that the quiet, no-sparks hot mug is usually a thirsty mug. Nobody was wrong, because everybody was describing a different mug.
Which brings us back to the office kitchen. The mug you can hold is vitrified through, uncrazed and unglittered. The one that bites is either thirsty, iron-rich or wearing jewelry. The one-minute water test will tell you which, and when you have no idea what a dish is made of, reach for heatproof glass.

References (click to expand)
- Microwave Ovens — U.S. Food and Drug Administration
- Cooking with Microwave Ovens — USDA Food Safety and Inspection Service
- Microwave Fundamentals, in Microwave Processing of Materials (1994) — National Research Council, National Academies Press
- Dielectric properties of water relevant to microwave assisted thermal pasteurization and sterilization of packaged foods — Gezahegn et al., Innovative Food Science and Emerging Technologies 74 (2021)
- Permittivity and Measurements — Komarov, Wang & Tang, Washington State University (Encyclopedia of RF and Microwave Engineering)
- Memorandum D10-14-67, Tariff Classification of Porcelain or China Versus Other Ceramics — Canada Border Services Agency
- Microwave Safe — Digitalfire Reference Library (ceramics trade source)
- US Patent 4,341,872, Microwave-compatible nepheline glass-ceramics — Corning Glass Works (1982)
- Evaluation of Microwave Synthesis of Ceramic Pigments Based on In Situ Dielectric Characterization — García-Baños et al., Materials 16(8) (2023), PMC
- Nestlé USA Recalls Metallic Mugs Sold with Starbucks-Branded Gift Sets Due to Burn and Laceration Hazards — U.S. Consumer Product Safety Commission (2024)
- US Patent 3,965,323, Method and apparatus for providing uniform surface browning of foodstuff through microwave energy — Corning Glass Works (1976)
- ASTM C1607-12(2025), Standard Test Method for Determination of "Microwave Safe for Reheating" for Ceramicware — ASTM International







